Cisco CCNA 200-301 Full Course with Practical LABS
Master the Cisco CCNA 200-301 topics and have hands-on LABS to be ready for the CCNA exam.
What you'll learn
-
All topics required to be able to pass the Cisco CCNA 200-301 exam successfully
- Understand the theoretical and practical parts required for the CCNA 200-301
- Become familiar with configuring Cisco Routers and Switches
Requirements
-
No prior prerequisites is required to follow this course
Description
Cisco CCNA is one of the most popular in the IT field. If you have already took courses with me before, you know that I taught courses from different vendors such as MikroTik, Ubiquiti, Huawei and LigoWave. But something that not much of you know about me that I have started my career working with Cisco equipment and only Cisco, and most of my experience that I have gained was from Cisco products. Starting from CCNA level up to CCNP and many Cisco specialist certificates, that's all what I have since 17 years the time that I have started studying and working on Cisco products. I have also taught thousands of students and helped them to be CCNA certified as well.
With all of this, I have decided to build up Cisco courses to help you also passing the CCNA 200-301 exam which is the latest updated exam for CCNA.
This course will cover the complete CCNA 200-301.
In this course I have covered everything taught in Cisco Press book Volume 1 & Volume 2 which cover the complete CCNA Routing & Switching.
In this course, I will cover the following topics:
- Introduction to Networking
- First time access to the Cisco Switch
- Local Area Network (LAN)
- Virtual Local Area Network (VLAN)
- Spanning-Tree Protocol
- EtherChannel
- IPv4 addressing
- First time access to the Cisco Router
- Router on a stick, Intervlan Routing, L3 EtherChannel
- IP Routing
- IPv6
- OSPF
- Wireless
- Access Control List
- DHCP using IPv4 and IPv6
- First Hop Redundancy Protocols (FHRPs)
- LAN Security
- Network Address Translation (NAT)
- VPN and IPSEC Concepts
- Network Management
- Quality of Server (QOS)
-
SDN, Automation & Programmability
Finally, if you have to be prepared for the Cisco CCNA 200-301 Routing & Switching exam, I advise you to enroll in my course and I am sure I will be able to help you to achieve the CCNA and become a Cisco Certified Engineer.
Your Instructor
Hello everyone. My name is Maher Haddad and I am a Certified MikroTik Trainer, Cisco Authorized Instructor and LigoWave Authorized Trainer.
I have decided to make this online school to share my knowledge to the community. All my courses are based on theory and hands-on LABS so you can practise while learning.
More than 100K happy students have joined mynetworktraining.com up to year 2022.
I hope you will enjoy watching my courses.
Course Curriculum
-
Preview1- Physical Hardware vs VIRL vs GNS3 vs Cisco Packet Tracer (17:27)
-
Start2- OSI Model, Encapsulation vs De-Encapsulation, Protocol Data Unit (PDU) (19:08)
-
Start3- TCPIP CSMACD Collision Domain and Broadcast Domain (14:32)
-
Start4- Understanding ARP, Unicast, Broadcast and Multicast (10:47)
-
Start5- TCP vs UDP - Explained (14:01)
-
Start6- How to connect to the Cisco Switch to be able to configure it (3:17)
-
Start7- Connecting to the Cisco Switch via the console using TerraTerm (3:57)
-
Start8- User vs privilege mode, Hostname, console password, RAM vs NVRAM (16:35)
-
Start9- Use help to get assisted with the configuration (4:36)