Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Cisco CCNA 200-301 Full Course with Practical LABS
Introduction to Networking
1- Physical Hardware vs VIRL vs GNS3 vs Cisco Packet Tracer (17:27)
2- OSI Model, Encapsulation vs De-Encapsulation, Protocol Data Unit (PDU) (19:08)
3- TCPIP CSMACD Collision Domain and Broadcast Domain (14:32)
4- Understanding ARP, Unicast, Broadcast and Multicast (10:47)
5- TCP vs UDP - Explained (14:01)
First time access to the Cisco Switch
6- How to connect to the Cisco Switch to be able to configure it (3:17)
7- Connecting to the Cisco Switch via the console using TerraTerm (3:57)
8- User vs privilege mode, Hostname, console password, RAM vs NVRAM (16:35)
9- Use help to get assisted with the configuration (4:36)
Local Area Network (LAN)
10- Introduction to LAN (Ethernet, Straight-through, Crossover, Fiber) (11:21)
11- How the switch learn the Addresses (6:41)
12- Troubleshooting Interfaces on the Switch (14:44)
Virtual Local Area Network (VLAN)
13- Introduction to VLAN (0:54)
14 - Why we need VLAN's in our network and how VLAN's work - Part 1 (17:30)
15 - Why we need VLAN's in our network and how VLAN's work - Part 2 (15:17)
16- Creating VLANs and making the ports as access port on the Cisco Switch (11:11)
17- Configuring Trunk ports on the Cisco Switch (11:04)
18- Understand how Vlan Trunking Protocol (VTP) works - Server, client, Transparent (13:35)
19- Understand and configure Native VLAN on Cisco Switch (8:09)
20- Configuring Voice VLAN on the Cisco Switch (9:18)
Spanning-Tree Protocol
21- Introduction to Spanning-Tree Protocol (1:10)
22- Explaining Problems on Redundant switching (10:34)
23- Explanation of how Spanning-Tree works (14:14)
24- Interface States in STP (8:27)
25- Difference between STP and RSTP (6:54)
26- Configuring Rapid-PVST and PortFast (12:54)
27- Spanning Tree BPDU Guard (4:52)
EtherChannel (Link Aggregation)
28- Introduction to EtherChannel (0:41)
29- EtherChannel Explained (6:25)
30- Configuring EtherChannel using the Manual mode (6:56)
31- Configuring EtherChannel using the PAGP mode (5:50)
32- Configuring EtherChannel using the LACP mode and Load Balancing (8:36)
IPv4 Addressing
33- Introduction to IPv4 (1:43)
34- Understand IP addressing (Public vs Private) and Subnet mask (18:58)
35- Decimal to Binary conversion and vice versa (8:11)
20- Subnetting calculation (12:55)
37- How to calculate a summary address (4:32)
First time access to the Cisco Router
38- Introduction to Cisco Router (1:16)
39- What is the Cisco Router and some Basic Configuration (13:49)
40- DHCP Client, Ping, Traceroute and interfaces (15:02)
41- Secure the Console port on the Cisco IOS Router (2:33)
42- Enable and secure Telnet on the Cisco IOS Router (6:20)
43- Configuring SSH on Cisco IOS Router (12:14)
Router on a Stick, Inter-VLAN Routing & L3 EtherChannel
44- Introduction to this section (1:21)
45- Understand and configure Router on a Stick on Cisco IOS (21:31)
46- Configuring InterVLAN Routing on Cisco L3 Switch (14:01)
47- Configuring L3 EtherChannel (7:57)
IP Routing
48- Introduction to IP Routing (0:51)
49- Why we need Routing in our network and what is the function of the Router (10:56)
50- Static Route vs Default Route (16:37)
51- Floating Static Route (11:40)
Internet Protocol v6 (IPv6)
52- Introduction to IPv6 (0:51)
53- IPv4 Exhaustion and addresses used (8:16)
54- IPv6 Successor to IPv4 (4:58)
55- IPv6 Characteristics (5:32)
56- IPv6 internet registries IANA RIR LIR (9:54)
57- IPv6 address Notation (11:18)
58- How to find the prefix of the IPv6 address (13:31)
59- IPv6 addresses types (7:29)
60- IPv6 Link-local address (8:25)
61- IPv6 Unique local address (7:16)
62- IPv6 Multicast address (3:37)
63- IPv6 Global Unicast address (3:35)
64- IPv6 Static Routing (18:24)
65- IPv6 Statless Autoconfiguration (8:57)
Open Shortest Path First (OSPF)
66- Introduction to OSPF (1:39)
67- EGP vs IGP and how Link State works (15:16)
68- OSPF areas and routers tasks (11:42)
69- Configuring OSPF in the backbone area (21:04)
70- OSPF Hello Packets explained (5:18)
71- Manipulating the Hello Packets in OSPF (18:13)
72- DR and BDR Election explained (12:56)
73- DR and BDR Election LAB (16:13)
74- Understanding and configuration passive interface in OSPF (9:07)
75- OSPF Default Route (6:30)
Wireless
77- Introduction to WLAN Fundamentals (0:53)
78- RF Frequency and Wavelength (10:58)
79- RF Fundamentals (10:48)
80- 802.11 Service Sets (8:49)
81- 802.11 Beacon- Probing- Authentication- Association and Data (10:27)
82- Free Space Path Loss (FSPL) (10:19)
83- Signal Attenuation (7:15)
84- 2.4 GHz spectrum and non-overlapping channels (6:32)
85- 2.4 GHz co-interference and adjacent interference channels (4:10)
86- 5 GHz and Channels Bonding (6:18)
87- IEEE 802.11 WLAN Standards (4:51)
88- Noise Floor and Signal to Noise Ratio (SNR) (8:49)
89- Wired CSMACD Wireless CSMACA and Hidden nodes problem (6:00)
90- RTS-CTS to solve hidden nodes on Wireless (5:12)
91- Problems of collisions are the client side (hidden node APs) (4:07)
Access Control List (ACL)
1- Introduction to Access Control List (1:01)
2- Access Control List - Explanation (22:41)
3- Configuring Standard Access List (14:09)
4- Access Control list for line vty (12:45)
5- Configuring Extended Access List (13:36)
DHCP using IPv4 and IPv6
6- Introduction to the Dynamic Host Configuration Protocol (DHCP) (1:06)
7- Understand the DCHP Process (DORA) (12:45)
8- Configure DHCPv4 Server on Cisco IOS (12:28)
9- Configure DHCPv4 client on Cisco IOS (8:09)
10- IPv6 Global Unicast Address Dynamic assignment (Stateless vs Stateful) (14:46)
11- Configure DHCPv6 Stateless Server (13:07)
12- Configure DHCPv6 Stateless Client (6:50)
13- Configure DHCPv6 Stateful Server (10:02)
14- Configure DHCPv6 Stateful Client (6:51)
First Hop Redundancy Protocols (FHRPs)
15- Introduction to First Hop Redundancy Protocols (2:35)
16- First Hop Redundancy Protocol Explained (8:09)
17- Understand and Configure HSRP (14:38)
18- Priority and Preemption on HSRP (7:33)
LAN Security
19- Introduction to LAN Security (1:08)
20- LAN Security explained (13:58)
21- MAC Address Table Attack (7:32)
22- Configuring Port-Security to secure from MAC Address Table Attack (14:08)
23- VLAN Hopping Attacks (8:42)
24- VLAN Attacks Mitigation (7:44)
25- DHCP Snooping against DHCP Attacks (9:55)
Network Address Translation (NAT)
26- Introduction to NAT (1:25)
27- Understand how NAT works and be familiar with the NAT terminology (7:56)
28- Configuring Static NAT (13:27)
29- Configuring Dynamic NAT on Cisco IOS (11:45)
30- Configuring PAT on Cisco IOS (15:58)
VPN and IPSEC Concepts
31- Introduction to VPN and IPSEC (0:55)
32- What is VPN - Explanation (9:20)
33- What is IPSEC - Explanation (9:10)
34- IPSEC Protocol suite explained (4:29)
35- IPSEC modes of communication - Transport vs Tunnel mode (8:10)
36- Types of Encryption - Symmetric vs Asymmetric (5:46)
37- Security over the internet using IPSEC (Diffie-Hellman) (14:01)
38- Encyption Protocol (DES-3DES-AES-Blowfish-Camellia-RSA-DH) (12:06)
39- Data Integrity - Hashing Algorithms (MD5 - SHA1 - SHA256 - SHA512) (8:01)
40- IPSEC Authentication (Pre-shared key vs Certificates) (6:53)
41- IPSEC Negotiation Protocols (AH vs ESP) (6:26)
42- IPSEC Negotiation Process and choices of IPSEC interesting traffic (7:43)
43- IPSEC IKE Phase 1 (ISAKMP Tunnel) (6:46)
44- IPSEC IKE Phase 2 (IPSEC Tunnel) (5:38)
45- IPSEC Data Transfer (2:18)
Network Management
46- Introduction to Network Management (1:21)
47- Device Discovery using CDP Protocol (11:01)
48- Link Layer Discovery Protocol (LLDP) (7:59)
49- Network Time Protocol (NTP) (9:41)
50- Logging and Syslog Server (17:36)
51- File Systems and TFTP (9:55)
52- Password Recovery on Cisco router (12:42)
53- Cisco IOS Image backup and Boot system (13:51)
Quality of Server (QOS)
54- Introduction to QOS (1:12)
55- Network Traffic Characteristics (10:33)
56- Cisco Queuing Algorithms (12:18)
57- Cisco QOS Models (14:08)
58- QOS Implementation tools (8:24)
Software-Defined Networking (SDN), Automation & Programmability
59- Introduction to SDN, Automation & Programmability (1:41)
60- Control Plane vs Data Plane vs Management Plane (7:43)
61- What is Software Defined Networking (SDN) (7:26)
62- Network Virtualization Technologies (6:48)
63- Types of SDN (7:30)
64- Data Formats (XML, JSON, YAML) (13:08)
65- Application Programming Interface (API) (6:31)
66- RESTful API (15:17)
32- Configuring EtherChannel using the LACP mode and Load Balancing
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock