Pfsense on GNS3 for LABS Emulation

Emulate Pfsense LABS on 1 PC using GNS3 software without the need of purchasing real equipments

What you'll learn

  • Understand how to download and install GNS3 Software
  • Understand how to get Pfsense working on GNS3
  • Understand how to create WAN and LAN interfaces on GNS3
  • Connect Pfsense to the WAN and LAN interfaces
  • No pre-requisiste is required
You are possibly looking to this page because youw ant to run Pfsense on GNS3 so you can do LABS. This is the right place :)
Pfsense is a BSD based software that you can use it for routing, firewalling, VPN, and much more things. In this course, I will show you step by step how you can have Pfsense installed on a single computer machine so you can emulate LABS. Additionally, I will show you how you can connect your real PC to that Pfsense virtual router so you can configure, and I will show you how you can connect the Pfsense router to the internet. All those steps will be shown on this course step by step so at the end you can deploy similar scenario on your PC.
The nice thing about this course is that you do not have to pay any penny to get this working. All you need to have is a PC and internet connection on that PC, then all softwares are free of charge and once you put them together you will have Pfsense running and you do practise LAB.
Of course on this course I am not going to make configuration on Pfsense because this is out of the topic for this course, but surely in future courses I will be showing you how you can configure Pfsense router and, trust me, everything will be covered :)
So if you want to know how to have Pfense working on GNS3, all you need to do is just to register in this course and I guarratee you that by end of the course you can have your Pfsense running on GNS3 on your PC!!!!

Who this course is for:
  • Students who want to emulate Pfsense LABS
  • Engineers who want to test a Pfsense configuring before deploying it on the production network

Your Instructor

Maher  Haddad
Maher Haddad

Hello everyone. My name is Maher Haddad and I am a Certified MikroTik Trainer, Cisco Authorized Instructor and LigoWave Authorized Trainer.

I have decided to make this online school to share my knowledge to the community. All my courses are based on theory and hands-on LABS so you can practise while learning.

More than 100K happy students have joined up to year 2022.

I hope you will enjoy watching my courses.

Frequently Asked Questions

When does the course start and finish?
The course starts now and never ends! It is a completely self-paced online course - you decide when you start and when you finish.
How long do I have access to the course?
After enrolling to the membership, you have unlimited access to this course for as long as your membership is valid - across any and all devices you own.
What if I am unhappy with the course?
We would never want you to be unhappy! If you are unsatisfied with your purchase, contact us in the first 14 days and we will give you a full refund.

Get started now!