Building up a Multihomed Core ISP network using Juniper
A fully practical course showing how to configure a multihomed ISP core network using Juniper appliances
Watch Promo
What you'll learn
- Build a fully redundant ISP core with Juniper
- Configure BGP routing protocol
- Configure OSPF routing protocol
- Configure AS PATH PREPEND attribute
Requirements
- Good knowledge with Juniper CLI, BGP and OSPF
Description
Setting up and ISP core network is always a challenge for every ISP. However, if it is designed correctly for one time, then the ISP network would work smoothly forever.
One of the best product to use when running an ISP network is Juniper. As being a very solid product, Juniper is an appliance that it is always highly recommended for ISP core networks and data centers.
In this course, I will use Juniper MX OS to show you how it is possible to build up from scratch a fully redundant and resillient ISP core network.
I will be using advance routing protocols such as Border Gateway Protoco (BGP) and Open Shortest Path First (OSPF) in order to build up my ISP core network. Additionally, I will have to configure the routers of the upstreams (in real life we do not do that) just because I will be doing a complete LAB and also you will learn how ISPs configure their upstream router.
By end of the course, you will have a fully redundant ISP network and you will have a full understanding of how you can configure your ISP core network yourself in your ISP.
I will be showing step by step how everything is being configure, and I will stop at every point and explain what I am doing.
If you wish to have a full understanding of how to set up an ISP core network using Juniper appliances, then this course is for you.
Who this course is for:
- Engineers working in ISPs and using Juniper products
Your Instructor
Hello everyone. My name is Maher Haddad and I am a Certified MikroTik Trainer, Cisco Authorized Instructor and LigoWave Authorized Trainer.
I have decided to make this online school to share my knowledge to the community. All my courses are based on theory and hands-on LABS so you can practise while learning.
More than 100K happy students have joined mynetworktraining.com up to year 2022.
I hope you will enjoy watching my courses.
Course Curriculum
New section
Available in
days
days
after you enroll
-
Preview1- Explanation about the LAB scenario of this course (7:00)
-
Preview2- Setting up IP addressing on the routers (9:37)
-
Start3- Configure BGP between the Upstream and ISPs routers (15:27)
-
Start4- Configure BGP between ISP1 and R1 (11:07)
-
Start5- Configure BGP between ISP2 and R4 (7:36)
-
Start6- Configure OSPF on the ISP core network (12:26)
-
Start7- Inserting a default route into OSPF (12:18)
-
Start8- Announce prefixes to both ISPs via BGP (16:36)
-
Start9- Allow Internet traffic to reach our prefixes using both ISPs with AS PREPEND attribute (18:35)
Frequently Asked Questions
When does the course start and finish?
The course starts now and never ends! It is a completely self-paced online course - you decide when you start and when you finish.
How long do I have access to the course?
How does lifetime access sound? After enrolling, you have unlimited access to this course for as long as you like - across any and all devices you own.
What if I am unhappy with the course?
We would never want you to be unhappy! If you are unsatisfied with your purchase, contact us in the first 14 days and we will give you a full refund.