Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Official Course: DHCP & VLAN on OPNsense
Introduction
1- Understand the theory behind DHCP server and Client as well DORA messages (17:33)
2- Difference between ISC and KEA DHCP server on OPNsense (8:22)
DHCP using ISC on OPNsense
3- Configure DHCP server on OPNsense using ISC (18:06)
4- Understand ARP protocol and how to use it to secure our network with OPNsense (9:57)
5- Apply the Static ARP entry on OPNsense to secure the network (10:39)
DHCP using KEA on OPNsense
6- Configure DHCP server on OPNsense using KEA (13:11)
7- IP Reservation using KEA DHCP on OPNsense (11:45)
Virtual Local Area Network (VLAN) on OPNsense
8- Best reasons to have VLANs in our network (Trunk & Access) (22:54)
9- Configure VLANs on the OPNsense router (22:15)
10- Configure VLANs on the Switch and assign the ports to Trunk and Access correctly (10:24)
11- Check if the configuring is working & end devices are assigned by the right IPs (6:29)
12- Disallow VLANs communication to happen on Layer 3 from the OPNsense router (10:33)
10- Configure VLANs on the Switch and assign the ports to Trunk and Access correctly
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock