Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Starting a Basic Wireless ISP (WISP) with MikroTik
Basic configuration steps to start a Wireless ISP
1- What is the LAB Scenario and what equipments are needed for the WISP (11:34)
2- Configuring the Main Router (Core) of the WISP (18:20)
3- Configuring the Switch the carry VLANs packets (8:05)
4- Configuring the Main AP at the WISP (12:58)
5- Connecting the Customer Wireless Station to the WISP Main AP (16:44)
Quality of Service (QOS) and Security
6- Introduction to Security and QOS on the WISP (2:49)
7- Disallow Customers Wireless Stations from seeing each other (13:40)
8- Allocate a Bandwidth speed to each customer using Mangle Rules and QOS (21:22)
Fine Tuning the Wireless connectivity
9- Introduction to wireless fine tuning (1:44)
10- Wireless Station alignment to the Main AP (7:10)
11- Changing the TX power for a better signal reception (10:39)
12- Wireless SNR, CCQ and HW Frames (17:25)
13- MikroTik nstreme and nv2 wireless protocols for more bandwidth (16:45)
14- Connect with me and see you!!!! (2:22)
7- Disallow Customers Wireless Stations from seeing each other
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock